Forza Lubricant Analysis
ASTM D892 | ASTM D6082 - Apparatus (AIR Bath Module) for the evaluation of Foaming Characteristics of Lubricating Oils
Model FT-D892-A-C/H: Individual AIR bath Module for measuring the foaming tendencies of lubricating oils in the temperature range of +24’c, 93.5’c and +150°C. For improved consistency of results, each module is equipped with Mass Flow Controller and Totalizer.
DKA A&B CEC L 48 - Apparatus for the determination of High Temperature Oxidation stability testing for ATF and Gear Oil.
Model OXY-DKA-IHT-X : Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of ATF and Gear Oil.
4, 6, and 8 Positions models equipped with Rotameter / MFC available
ASTM D1401 – Apparatus for the evaluation of Water Separability of Petroleum Oils and Synthetic Fluids
Model WS-D1401-L-7: Seven test positions apparatus that meets the full requirements of ASTM D1401 and related Water Separability (Demulsability) methods.
ASTM D943 | ASTM D2893 | ASTM D5846 | ASTM D6594 | ASTM D4310 - Apparatus for the determination of Oxidation Characteristics of various lubricants / Industrial oils.
Model OXY-X-L-X: Manual LIQUID Bath for Oxidation Stability of various lubricants / Industrial oils. 4, 6, 8, 12 and 15 Positions models available.
ASTM D445 – Apparatus for measuring the Kinematic Viscosity of Transparent & Opaque Liquids (and Calculation of Dynamic Viscosity)
Model HTKV-D445-L-7 : Manual High (40’C to 150’c) and Low (-20’c to -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.
Awaiting Information On The Products Below
ASTM D1881 – Apparatus for the determination of Foaming Tendencies of Engine Coolants
Model FT-D1881-L-2: Manual Heated Liquid Bath with 2 flowmeters, 2 test positions
ASTM D8277 | AFNOR NEF E48-690/691 | ISO 13357 - Automated Apparatus for Hydraulic Oil Filterability test.
Model HFLT-AFNOR-AT-2/4: Automatic Hydraulic Oil Filterability Apparatus, 2,4 test positions models available, Each position is independently controlled by a Windows-based Touchscreen PC.
ASTM D8277 | AFNOR NEF E48-690 | NF E48-691 | ISO 13357 - Manual Apparatus for Hydraulic Oil Filterability test.
Model HFLT-AFNOR-M-2 : Manual Hydraulic Oil Filterability Apparatus, 2 test positions model available, Each positions can be independently controlled.
ASTM D892 | ASTM D6082 - Apparatus (Liquid) for the evaluation of Foaming Characteristics of Lubricating Oils
Model FT-D892-L-4: Two glass jars mounted on a supporting base. Each jar accepts TWO, 1-liter test cylinders for ASTM D892 testing. One bath is typically controlled at 24 C and the other for 93.5 C. For improved consistency of results, apparatus is equipped with Mass Flow Controller and optionally a Totalizer.