Labplant UK logo

Tel:+44 (0) 1723 892262 | sales@labplantuk.com

Logo Strip

infratest logo
omnitec logo
orbis bv logo logo
paragon scientific logo
pilodist logo
forza logo

Home page slider

Products

Products (64)

Friday, 30 October 2020 10:52

Forza Glassware Consumables

Written by

Forza Glassware Consumables

ASTM Petroleum Lab Glassware

Precision laboratory glassware for the petroleum laboratories. Including Distillation flask, Viscometer tube, Oxidation test tube, Oxidation condenser, Foam cylinder, Water seperability test cylinder, Reaction vessels and Custom glassware. Etc.

get a brochure button

get a quote button

Forza Fuel Analysis

 


Accessories and Consumables

Foam test Diffusers, Oxidation Copper coil, Corrosion test coupons and FIA silica gel. Etc.

get a brochure button

get a quote button

Forza Fuel Analysis

 

Friday, 30 October 2020 10:47

Forza Biofuel Analysis

Written by

Forza Biofuel Analysis

ASTM D4539 – Apparatus for the Determination for the filterability of Diesel fuels and Biodiesel blend fuels in automotive equipment at low temperatures.

Model: LTFT-D4539-A-1: Single Position Automated Apparatus for Low Temperature Filterability Test (LTFT)

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D6468 | DuPont Stability [Octel F21] - Apparatus (Liquid) for the determination of High Temperature Stability of Middle Distillate Fuels

Model OXY-D6468-F21-L-8: Manual Liquid Bath for Oxidation Stability of Distillate Fuel Oil. 6 Positions model is available

get a brochure button

get a quote button

Forza Fuel Analysis

 

Friday, 30 October 2020 10:32

Forza Lubricant Analysis

Written by

Forza Lubricant Analysis

ASTM D892 | ASTM D6082 - Apparatus (AIR Bath Module) for the evaluation of Foaming Characteristics of Lubricating Oils

Model FT-D892-A-C/H: Individual AIR bath Module for measuring the foaming tendencies of lubricating oils in the temperature range of +24’c, 93.5’c and +150°C. For improved consistency of results, each module is equipped with Mass Flow Controller and Totalizer.

get a brochure button

get a quote button

Forza Fuel Analysis

 


DKA A&B CEC L 48 - Apparatus for the determination of High Temperature Oxidation stability testing for ATF and Gear Oil.

Model OXY-DKA-IHT-X : Manual Individual Heated Tube Apparatus (DRY) for Oxidation Stability of ATF and Gear Oil.

4, 6, and 8 Positions models equipped with Rotameter / MFC available

get a brochure button

get a quote button

Oxygen Stability Gear Oil

 


ASTM D1401 – Apparatus for the evaluation of Water Separability of Petroleum Oils and Synthetic Fluids

Model WS-D1401-L-7: Seven test positions apparatus that meets the full requirements of ASTM D1401 and related Water Separability (Demulsability) methods.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D943 | ASTM D2893 | ASTM D5846 | ASTM D6594 | ASTM D4310 - Apparatus for the determination of Oxidation Characteristics of various lubricants / Industrial oils.

Model OXY-X-L-X: Manual LIQUID Bath for Oxidation Stability of various lubricants / Industrial oils. 4, 6, 8, 12 and 15 Positions models available.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D445 – Apparatus for measuring the Kinematic Viscosity of Transparent & Opaque Liquids (and Calculation of Dynamic Viscosity)

Model HTKV-D445-L-7 : Manual High (40’C to 150’c) and Low (-20’c to -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.

get a brochure button

get a quote button

Forza Fuel Analysis

 

 

Awaiting Information On The Products Below

 


ASTM D1881 – Apparatus for the determination of Foaming Tendencies of Engine Coolants

Model FT-D1881-L-2: Manual Heated Liquid Bath with 2 flowmeters, 2 test positions

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D8277 | AFNOR NEF E48-690/691 | ISO 13357 - Automated Apparatus for Hydraulic Oil Filterability test.

Model HFLT-AFNOR-AT-2/4: Automatic Hydraulic Oil Filterability Apparatus, 2,4 test positions models available, Each position is independently controlled by a Windows-based Touchscreen PC.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D8277 | AFNOR NEF E48-690 | NF E48-691 | ISO 13357 - Manual Apparatus for Hydraulic Oil Filterability test.

Model HFLT-AFNOR-M-2 : Manual Hydraulic Oil Filterability Apparatus, 2 test positions model available, Each positions can be independently controlled.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D892 | ASTM D6082 - Apparatus (Liquid) for the evaluation of Foaming Characteristics of Lubricating Oils

Model FT-D892-L-4: Two glass jars mounted on a supporting base. Each jar accepts TWO, 1-liter test cylinders for ASTM D892 testing. One bath is typically controlled at 24 C and the other for 93.5 C. For improved consistency of results, apparatus is equipped with Mass Flow Controller and optionally a Totalizer.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D2619 - Apparatus for the evaluation of Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

Model HYBT-D2619-12 - Hydrolytic Stability Bottle Tumbler / Oven for rotating TWELVE 200 ml (7 oz) bottles at 93°C. Confirms to ASTM D2619

get a brochure button

get a quote button

Forza Fuel Analysis

 

Friday, 30 October 2020 09:10

Forza Fuel Analysis

Written by

Forza Fuel Analysis

ASTM D525 – Apparatus for the determination of oxidation stability of gasoline by induction method

Model OX-D525-B-X: Heated aluminum block apparatus with automatic data acquisition system. 4 and 6 positions models available.

View PDF For Oxidation Stability Testing-ASTM-D525

get a quote button

Oxidation Stability Testing - ASTM-D525

 


ASTM D2386 – Apparatus for the determination of Freezing Point of aviation Fuels

Model FZ-D2386-L-2 : Manual low temperature (-70’c) Liquid bath for the determination of the temperature below which solid hydrocarbon crystals may form in aviation turbine fuels and aviation gasoline. Conforms to method ASTM D2386

View PDF For ASTM D445 - Low Temp KV Bath

get a quote button

astm d445 kinematic viscosity low temp

 


ASTM D2274 – Apparatus (DRY) for the determination of Oxidation Stability of distillate fuel oil (Accelerated method)

Model OXY-D2274-IHT-X : Manual Individual heated tube apparatus (dry) for oxidation stability of distillate fuel oil (Accelerated method). 4, 6, and 8 positions models equipped with Rotameter / MFC available.

View PDF For Oxidation-Stability-Tube-Heater - ASTM D2274

get a quote button

Oxidation Stability Tube Heater-ASTM D2274

 


ASTM D2274 – Apparatus (Liquid) for the determination of Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

Model OXY-D2274-L-X : Manual liquid bath for oxidation stability of distillate fuel oil (Accelerated method). 4, 6, 8, 12 and 15 positions models available.

View PDF - Oxidation Stability Liquid Bath - ASTM D2274

get a quote button

Oxidation Stability Liquid Bath-ASTM D2274

 


IP227 - Apparatus for the evaluation of Corrosiveness to Silver of Aviation Turbine Fuels - Silver Strip Method

Model SLC-IP227-L-6: Manual Stainless Steel Liquid (Oil) Bath for Silver Strip Procedures. SIX Positions model available.

get a brochure button

get a quote button

Silver Corrosiveness Test

 


ASTM D445 – Apparatus for the determination of Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Model LTKV-D445-L-4: Manual Low (-20’c / -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.

View PDF - Liquid Bath for determination of kinematic viscosity of liquid petroleum products

get a quote button

astm-d445-kinematic-viscosity-high-and-low

 


ASTM D445 – Apparatus for the determination of Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

Model HTKV-D445-L-7 : Manual High (40’C to 150’c) and Low (-20’c to -65’c) Temperature Liquid Bath for the determination of the kinematic viscosity of liquid petroleum products, both transparent and opaque.

View PDF - Kinematic Viscosity of liquid petroleum products tester - Transparent and Opaque

get a quote button

Kinematic Viscosity of liquid petroleum products tester - Transparent and Opaque

 

 

Awaiting Information On The Products Below

 


ASTM D323 - Apparatus for the determination of Vapor Pressure of Petroleum Products (Reid Method)

Model RVP-D323-L-4 : Manual Stainless Steel Liquid Bath for Reid Vapor Pressure Test. 4 Position Model is available.

get a brochure button

get a quote button

Forza Fuel Analysis

 


NACE TM0172 - Apparatus for the evaluation of Corrosive Properties of Insoluble Petroleum Product Pipeline Cargoes

Model RU-TM0172-L-6-: Manual Liquid Bath for corrosive properties of liquid petroleum products/liquid hydrocarbon products that are not water soluble, for transport through a steel pipeline. 4 and 6 positions models available.

get a brochure button

get a quote button

Forza Fuel Analysis

 


ASTM D2699 | D2700 | D2885 – Refrigerated Air Intake Dehumidifier for CFR Octane Knock Engines

Model OC-IAC-D : Refrigerated Air Intake Dehumdifier / Chiller for Octane Knock Engines, FORZA system, draws in room air, filters that air, and then sends the dehumidified and chilled air into the Octane engine's carburetor. It is designed to chill the inlet air to 1.5° to 3.5°C.

get a brochure button

get a quote button

Forza Fuel Analysis

 

Thursday, 29 October 2020 10:54

FORZA Products

Written by


Forza Products Logo

FORZA Product page - Click On Images To View Details

Forza International is a manufacturer of laboratory testing equipment for the Fuel, Lubricant, Grease and Asphalt industries, focusing primarily on designing equipment, which analyses physical properties such as oxidation stability, corrosive properties, vapour pressure, viscosity, foaming, water separability, cloud, pour, CFPP, Freeze point and other such tests.

Forza products include manual, semi-automated, and automated models which adhere to standards such as ASTM, DIN, ISO, IP, EN, and FTM.

TESTING EQUIPMENT

Friday, 04 September 2020 05:06

Omnitek U-Visc Series 200

Written by

Omnitek U-Visc Series 200

The PAM V2 is the second generation of our automatic distillation unit

Its modern ease of use, the reliable high quality hard-& software components and especially its outstanding automatic performance are what makes PAMv2 the unique distillation unit it is in today’s market.

One of the innovations is the smart Volume Scan, which scans the entire length of the cilinder simultaneously and continuously. This enables PAMv2 to actually registrate the bottom of the meniscus and perform powerful and fast interactions on the heating system.

Together with the in-depth customization options PAMv2 is capable of running even the most difficult samples succesfully within the method specifications.

PAM V2 will increase the repeatability and reliability of your distillation results, even with the most difficult samples!

Another innovation is the DistPad controlling software for iPad. Easy to use for low level operators and extremely customisable for experienced users.

PAMv2 is suitable for both high-output lab production and research purposes. And of course user rights can be protected with a password.

Software updates can be downloaded for free in the Apple AppStore.

Join many other satisfied customers and learn how PAMv2 answers your distillation needs.

 

 

 

get a quote button

Thursday, 03 September 2020 13:05

Omnitek BitUVisc

Written by

Omnitek BitUVisc viscometer

FULLY AUTOMATIC VISCOMETER FOR HIGHLY VISCOUS SAMPLES UP TO 120,000 mm2/s

Finally an instrument that eliminates the need for the tedious, labour intensive manual loading, measurement and cleaning of high viscosity samples

  • For high temperature, high viscosity applications
  • Fully automatic measurement and cleaning
  • Stand alone or PC control
  • Preheated dual solvent cleaning

Omnitek introduces the newest member to the U-Visc family of fully automatic viscometer systems. Specifically developed to cover sample types which pose great challenges to automatic sampling, measurement and cleaning, because of their high pour point and viscosity.

Flexible and reliable

The instrument was designed to be versatile and flexible, yet easy to use to cover the hardest applications. Different models are available with 1 or 2 viscometer tubes, allowing for the analysis of a wide range of viscosities and sample types.

Viscometer tubes are based on the well-known and proven Ubbelohde design. Using specially designed thermal sensors, these tubes allow the detection of fully opaque fluids without any

problems or limitations and eliminate the need to use the reverse flow tubes. The standard configuration offers viscosity measurement up to 150ºC and sample preheating up to 200ºC

Sophisticated temperature control ensures that measurements are carried out well within the required temperature stability. The system features an innovative single position auto-sampling which provides integrated heating of the sample up to 200ºC and uses preheated solvent to effectively clean the viscometer tube. The BitUVisc uses the special designed duplo viscometer tubes for unstable samples such as vacuum residues, additives, crude oils, waxes, heavy fuel oils, polymers, asphalts, etc., which typically show poor determinability when sampled repeatedly. These tubes have 2 measuring sections with an approximately similar tube constant. This allows for an actual duplo determination while only sampling once.

The instrument requires a PC for full operation, which is controlled through an advanced PC software application but it can also be controlled as a stand-alone unit through the responsive color touchscreen interface. PC software allows the operator to specify optimized and fully customizable test methods for each individual sample with the click of a mouse

 

 

get a quote button

Thursday, 03 September 2020 13:04

Omnitek S-flow IV

Written by

Omnitek S-flow IV

The newest generation of S-flow systems offers the ultimate in fast, accurate viscosity testing and now also features an optional autosampler for fully unattended operation.

  • Optional autosampler
  • Simultaneous tests at 2 temperatures
  • High throughput: up to 80 samples per hour
  • Fast & easy tube replacement

The S-flow IV+ instrument consists of compact, bench-top automated viscometry systems for the analysis of Newtonian fluids. It complies fully with ASTM D7279 and as such, gives full correlation with ASTM D445. It is the ideal system for used oil labs that need to test a wide range of lubricant viscosities

Fast & accurate

The latest generation of S-flow builds on the strong foundation of its predecessors to offer the ultimate in automatic viscosity testing of Newtonian samples such as petroleum products. The system offers all the tried and tested advantages of a Houillon-type tube design such as short process times, small sample volume and low solvent consumption, but now also includes an optional auto-sampler to allow for fully unattended operation. All controlled from a central user interface that takes care of result storage, auto-sampler control, VI calculations and much more.

2 temperatures

The new S-flow IV+ consists of a 2 bath system with 2 tubes in each bath, providing a total of 4 tubes. The baths were designed to work independently, making it possible to use both baths at the same temperature, or at different temperature, ranging from 20°C to 120°C. Other options include dual solvent cleaning and integrated duplo testing which obtains 2 flow time determinations with only 1 sample injection.

Additional parameters such as tube constants and cleaning cycle are also controlled by the operator, because the sample volume is very low (0.3-1 ml). The entire measurement cycle is very short. The complete cycle time ranges are between 3-10 minutes per tube, allowing a throughput of up to 80 tests per hour. After the injection of the sample, operator presence is no longer required.

Options and accessories

All measurement parameters, such as warmup times and cleaning parameters can be set through the high resolution 12” touchscreen or with optional PC software. The diagnostic system alerts the operator to possible issues such as empty solvent supply tanks, full waste bottles and other potential issues. The optional auto-sampler is fully modular and in-field upgradeable, meaning you can purchase the analyser first and then upgrade to auto-sampling when the need arises.

 

pam v2 01

 

get a quote button

Thursday, 03 September 2020 13:01

Omnitek U-Visc Series

Written by

Omnitek U-Visc kinematic viscometer

FULL RANGE OF AUTOMATIC VISCOMETRY SYSTEMS FOR LUBRICANTS AND OTHER PETROLEUM PRODUCTS

“The U-Visc viscometry system was designed with full ASTM D445 compliance in mind, combined with low solvent consumption, high unattended throughput, ease of use and reliability

  • Autosampler carrousel
  • Sampling using vacuum or pressure
  • High throughput
  • Optional duplo viscometer tubes for unstable samples

The Omnitek U-Visc combines several unique features, making it the instrument of choice in many applications, ranging from QC to R&D to used oil analysis. While offering full compliance with ASTM D445/446, the specially designed viscometer tubes cover a 100-fold range.

Versatile and reliable

The tubes are based on the well-known and proven Ubbelohde design, but only require 8-16 ml of sample and approx. 12-15 ml of solvent for each cleaning cycle. Available with single or dual solvent cleaning, the instrument measures kinematic viscosity in lubricants between 0.15 and 25,000 mm2 /s.

Designed to be versatile and flexible, yet easy to use. Different models are available ranging from 1 bath with 1 or 2 tubes, up to 2 baths with 1 or 2 tubes per bath, where each bath works independently. Sophisticated temperature control ensures that measurements are carried out according to D445 requirements. Each bath features a sampling tray with 16 samples per tube, allowing completely unattended operation at different temperatures. Depending on the viscosity of the sample, the instrument can process up to 10 samples per tube per hour, leading to a maximum capacity of up to 40 samples per hour, satisfying even the needs of high volume labs running several hundred samples per day.

The U-Visc requires a PC for operation but can also be controlled as a stand-alone unit through the responsive color touchscreen interface. For data collection, storage, calculations and reporting, an advanced PC software application is provided with the instrument, which can gather data from multiple instruments simultaneously.

For 200 series, if the baths are run at 40 and 100ºC, the instrument will automatically calculate the sample’s Viscosity Index, based on the results from both baths.

AVAILABLE MODELS

 U-Visc 110U-Visc 120U-Visc 210U-Visc 220
Nr. of baths 1 1 2 2
Tubes / bath 1 2 1 2
Nr. of samples 16 32 32 64
Dimensions 38 x 62 x 78 cm 38 x 62 x 78 cm 75 x 62 x 78 cm 75 x 62 x 78 cm
Nr. of samples 54 kg 54 kg 92 kg 92 kg

 

U-Visc 110 / 120

U-Visc 210 / 220

 

get a quote button

Thursday, 03 September 2020 11:22

Automatic Viscometers

Written by

Automatic Viscometers

Automatic Viscometers

Omnitek U-Visc Series.

Omnitek U-Visc Series

Omnitek S-flow IV.

Omnitek S-flow IV

Omnitek BitUVisc.

Omnitek BitUVisc

Page 1 of 5